M
MrAdults
Guest
I was referring to the issues with bad states and having to reboot and so forth. Your complaint sounds like it's simply related to texel alignment, which is "fixable" in a variety of ways.
- Status
C
Chrysalis
Guest
ok thanks, has anyone got a clip of the game with just the custom graphics driver but no other graphics related patches?
If I understand this right, this allows various resolutions (not just 1280x960), as well as working on all new gfx cards? Which is good news for me although 640x480 works well on my laptop for some reason it scales it well so has full screen height, I eventually plan to play it on my desktop pc on a 22" lcd and 640x480 would be poor on it I expect.
If I understand this right, this allows various resolutions (not just 1280x960), as well as working on all new gfx cards? Which is good news for me although 640x480 works well on my laptop for some reason it scales it well so has full screen height, I eventually plan to play it on my desktop pc on a 22" lcd and 640x480 would be poor on it I expect.
H
Hellbringer616
Guest
Just change the monitor scaling inside the nVidia control panel to off (if you have ATI there is away i don't know how though) that will fix any stretching you have.
C
Chrysalis
Guest
it will but on a 22" 640x480 will look small to the size of the monitor.
M
magixts
Guest
Ok, the "you guys" had me confused.
R
Red46
Guest
Just a small heads up for anyone using an ATI card. Using catalysts 9.4 with this driver, will cause massive fps drop in materia/items menu, and fields. Stick to 9.3.
D
d33eniz
Guest
Just can say AWESOME 
I'll try, 0.4 version, waiting for the 0.5
Deniz
EDIT: 'kay, I tried it^^
But I can't see any differences^^ Mmmh... Just normal... I have the german 1.02 version of FF7- I think that's the problem, can you make a german Version of your Patch
eventually, and please, of course
I'll try, 0.4 version, waiting for the 0.5
Deniz
EDIT: 'kay, I tried it^^
But I can't see any differences^^ Mmmh... Just normal... I have the german 1.02 version of FF7- I think that's the problem, can you make a german Version of your Patch
eventually, and please, of course
Last edited:
A
Aali
Guest
Sounds more like it didn't load at all, its supposed to display an error message (or crash if version detection fails) when loaded into an incompatible version.Just can say AWESOME
I'll try, 0.4 version, waiting for the 0.5
Deniz
EDIT: 'kay, I tried it^^
But I can't see any differences^^ Mmmh... Just normal... I have the german 1.02 version of FF7- I think that's the problem, can you make a german Version of your Patch
eventually, and please, of course
If you provide the .exe I can make sure its compatible with the german version, but that probably wont solve the problem you're having.
M
myst6re
Guest
A
Aali
Guest
Done, 0.5b will have support for the german version (0.4b does not and will give you an error message)
(0.4b does not and will give you an error message)
D
d33eniz
Guest
Yaya, awesome, thank ya
But there's still one question... What are the differences exactly? AA or somthing like the High Res Patch, without High-Res, but with improvements
Yeah, I downloaded your 0.4b Version, copied to my FF7 directory and installed your registry key and started FF7^^
Nothing happened. No error message, nothing...
Does it work with Dziugo's Patches?
Could be that the problem?
But there's still one question... What are the differences exactly? AA or somthing like the High Res Patch, without High-Res, but with improvements
Yeah, I downloaded your 0.4b Version, copied to my FF7 directory and installed your registry key and started FF7^^
Nothing happened. No error message, nothing...
Does it work with Dziugo's Patches?
Could be that the problem?
A
Aali
Guest
It will work with almost any patches (if not, you'll get an error message or crash)
The difference is that you can run FF7 in higher resolutions or window mode without introducing any new glitches. (Hi-res patch creates a number of glitches)
0.5b will allow you to create postprocessing shaders so you can apply fullscreen filters or whatever.
But the main goal is really to replace the d3d2 driver and get rid of all of its problems with newer hardware.
The difference is that you can run FF7 in higher resolutions or window mode without introducing any new glitches. (Hi-res patch creates a number of glitches)
0.5b will allow you to create postprocessing shaders so you can apply fullscreen filters or whatever.
But the main goal is really to replace the d3d2 driver and get rid of all of its problems with newer hardware.
H
Hellbringer616
Guest
won't 0.5b also allow other video codecs other then TM2? Or did you scrap that idea?
A
Aali
Guest
Scrap it? I've already implemented it, I even posted a screenshot of it in action. 
But its not relevant unless you intend to replace the original movies, and there's no replacement set that isn't compatible with the original game (yet).
But its not relevant unless you intend to replace the original movies, and there's no replacement set that isn't compatible with the original game (yet).
H
Hellbringer616
Guest
Ohh alright, Awesome, Maybe i'll remake my own cutscenes in 720P! (unlikely, i suck at modeling haha)
M
Multech
Guest
I would like to congratulate you on doing such a fine job with this......
In fact I created an account on this forum just for this purpose...
The reason why I didn't use SAINT's mod was because it didn't support 1280x800 (which is the maximum resolution for my laptop)
and yours does....
I really love your mod but I came across a very minor problem and I thought that it would be good to let you know.... when using this mod (http://namespooferff7.synthasite.com/) and yours together, Cloud Strife is missing a part of his leg when in battle mode---
I will post a screenshot of this as soon as I learn how to....
But all in all, an excellent mod...
Thanks Aali
EDIT-- here is the screenie I promised... look at Cloud's leg foot, you may have to open it in a new tab to actually see it properly....
In fact I created an account on this forum just for this purpose...
The reason why I didn't use SAINT's mod was because it didn't support 1280x800 (which is the maximum resolution for my laptop)
and yours does....
I really love your mod but I came across a very minor problem and I thought that it would be good to let you know.... when using this mod (http://namespooferff7.synthasite.com/) and yours together, Cloud Strife is missing a part of his leg when in battle mode---
I will post a screenshot of this as soon as I learn how to....
But all in all, an excellent mod...
Thanks Aali
EDIT-- here is the screenie I promised... look at Cloud's leg foot, you may have to open it in a new tab to actually see it properly....
Last edited:
A
Aali
Guest
Hmm, yes, looks like its kinda going through the floor there? I've noticed some other places where the z coords seem just a little bit off compared to d3d. Obviously not high priority but I'll be on the lookout for anything that could cause those issues.
A
Aurenasek116
Guest
Edit:
Weird, I restarted laptop and now it works just fine, however there is another problem now. The movies don't show up, I only hear sound of them playing but instead of video I get white screen.
Weird, I restarted laptop and now it works just fine, however there is another problem now. The movies don't show up, I only hear sound of them playing but instead of video I get white screen.
Last edited:
A
Aali
Guest
Confirmed, the OpenGL 1.1/no FBO indirect path has some issues..
It should work if you make it render directly (internal res == output res) but then you get the minor field glitches of course.
It should work if you make it render directly (internal res == output res) but then you get the minor field glitches of course.
A
Aurenasek116
Guest
Awww, is it fixable for you in the next release? Also, any idea why the movies don't work now? (This also goes for fmv backgrounds :/)
- Status