[FF7] Original and Outdated Tutorial - Bootleg Configurator

  • Thread starter Thread starter PitBrat
  • Start date Start date
Status
Not open for further replies.
is that you clydearrowny?
Click to expand...
negative, not a name I've ever gone by. Been using BladeArrowney or FyreArrowney (or some variant of) around the web since pre 2000.
 
bladearrowney,
I looked into the problem some more.
Bootleg is freezing when it attempts to execute ulgp.exe in a command shell.
Most versions of Win7 support command shell.  Are you using Win7 Ultimate?
I've not recreated the error.

There is a new version of ulgp.exe
This is the version included with Bootleg:


ulgp_v0.4.3_aio.7z                              Luksy           Aali's LGP Tool with Repacking Support  Qhimm FILE SOURCE


Even though the necessary libraries are included in that version, you may need to manually install them.
 
I have a problem. I just tried to install the newer mods with Bootleg, but when I enable the Millenia+Mike weapons, only the Millenia weapons show up. I also set the menu portraits to the Anniversary version, but only the regular portraits with the faded edges show up. At first I thought the Aeris Revival mod was interfering with stuff, but when I only enabled the Remastered and New Spell mods, the problem remained. Does anyone know what's going on? The mod list in Bootleg marked all my files as green and yellow, and TestFiles.exe lists everything as fine so I don't think my files are messed up.
 
Those are two known errors.
The missing weapons are due to a filename error:
Change the filename of the mod to: Trish(aka Mike)_s custom model pack.7z
You have to add the _.

The avatar presets are broken in 0038.
To install the correct avatars, set AVATAR PRESET to CUSTOM before running bootleg.

If you are missing music after Bootleg:
Extract OSTRe.7z to .\FF7Music\OSTRe\

I've fixed a lot of errors.

Thank you for your support.  You're helping make Bootleg better.
 
Ah, thanks for that. I'll follow your directions.

One last thing though that I didn't mention...for some reason, the fast checksums in TestFiles marks the enhanced movie files (ff7_enhanced_movies_1.part1.rar to ff7_enhanced_movies_2.part4.rar) as corrupted, even after I redownloaded them from Mediafire and ran TestFiles again. I haven't been able to try it with the slow checksums though since Mediafire won't let me download it. Is this happening for you or anyone else here? I'm downloading the bigger zip files now to use instead of the rar files, but Rapidshare's download speeds are HORRIBLE.
 
bladearrowney,
I looked into the problem some more.
Bootleg is freezing when it attempts to execute ulgp.exe in a command shell.
Most versions of Win7 support command shell.  Are you using Win7 Ultimate?
I've not recreated the error.

There is a new version of ulgp.exe
This is the version included with Bootleg:


ulgp_v0.4.3_aio.7z                              Luksy           Aali's LGP Tool with Repacking Support  Qhimm FILE SOURCE


Even though the necessary libraries are included in that version, you may need to manually install them.
Click to expand...
Thanks for the update, I'll take a shot at installing the libraries and see if it makes a difference. Out of curiosity, does the Unified Mod installer also use ulgp? I got that to do an "install all" without failing, although game behavior and models were...interesting. Running ulgp from the command prompt seems to work,

Also, to your windows question, it's Windows 7 Professional x64, version that falls between home premium and ultimate.

I'll continue to play around with it and report back
 
Hokay, so here's what I've found

I have a feeling that the issue is related to my choice of storage location for the bootleg setup files. I've been playing around with ulgp.exe to see if I could get it to run, and so far no luck (at least not as intended).

This is with an adminitrative shell (cmd run as admin)

Here's some examples

ulgp.exe d W:\field\ char.lgp
ulgp.exe v0.4.3
Dumping W:\field\
The system cannot find the path specified.

ulgp.exe d "W:\field\" char.lgp
ulgp.exe v0.4.3
Usage: ulgp.exe d|e|r lgp folder [files...]

It gets more interesting

ulgp.exe d C:\temp\field char.lgp
ulgp.exe v0.4.3
Dumping C:\temp\field...
Access is denied.

in fact, just about any other location where I try to run it from tells me access denied, which is interesting. Even when forcibly running it as admin and setting the location of the file to have security for "everyone" with full permissions, it still tells me access denied.

It also hates my drive that has drive letter W, refuses to find files on it.

Actually, now that I've relaunched the command prompt, it doesn't want to find any files, anywhere. Seems if I launch command prompt using right click + run as admin, it won't find any of the file locations. If I just run command prompt normally, I get access denied errors most of the time, with the occasional failure to find location

thoughts? I'm stumped. libs were manually installed to system32, and also placed in the same directory to no avail.

EDIT: I left a post on the thread for ulgp as well...
 
Last edited:
@Klaw117: Error found and corrected.
                   Please test your files again.
 
@Klaw117: Error found and corrected.
                   Please test your files again.
Click to expand...
Thanks for looking into it, but the checksum errors still show up. Are the links to the re-uploaded files the same as the ones in the Big List of Mods or do I have to look elsewhere for the correct links? I managed to get the .zip files from Rapidshare though, so I can use those for the time being. On that note, thanks for the info on Mediafire and Rapidshare in your PM. I knew Rapidshare decreased download speeds for free users, but I didn't think it was that severe.
 
@Klaw117: Sorry, the error was in the checksum files and not in the Big List of Mods.
                   You must look here :  http://www.mediafire.com/?c4tqq61i1xrv1
Click to expand...
Thanks for the clarification. The files no longer appear corrupt.

EDIT: I'm still getting two problems, although they're minor.
Those are two known errors.
The missing weapons are due to a filename error:
Change the filename of the mod to: Trish(aka Mike)_s custom model pack.7z
You have to add the _.

The avatar presets are broken in 0038.
To install the correct avatars, set AVATAR PRESET to CUSTOM before running bootleg.

If you are missing music after Bootleg:
Extract OSTRe.7z to .\FF7Music\OSTRe\

I've fixed a lot of errors.

Thank you for your support.  You're helping make Bootleg better.
Click to expand...
I added the underscore, but that didn't fix anything. For good measure, I even downloaded both versions of the weapons pack (one with the 's and the _s) and re-installed FF7 and re-applied the mods, but the weapons are still missing and only the Millenia weapons show up. The second issue is that during the intro movie, the music backtracks slightly right after the Final Fantasy VII title shows up. Basically, as the camera zooms out from Aeris and Midgar, everything is fine and then when the Final Fantasy VII title shows up, the music goes back a few seconds, so the rest of the movie is a few seconds ahead of the music. Is this also a known issue?
 
Last edited:
I think it's adding an apostrophe that works, at least that's how it was for me.

Trish(aka Mike)'s custom model pack.7z

Spelled exactly like that it loaded just fine.
 
Trish(aka Mike)'s custom model pack.7z

That is the spelling that works for me.
 
The first one I had was with the apostrophe and that didn't work, so I changed it to the underscore and when that didn't work, I decided to keep both in my mod folder and it didn't work. I suppose I could always just try again later.

EDIT: Just tried it again and it didn't work, but I know for sure that Millenia+Mike is selected, unless there's something going on where Bootleg shows it as selected when it really isn't. I also noticed this error, but I'm unsure if it's related to this issue:
http://img195.imageshack.us/img195/6600/bootlegerror.png
 
Last edited:
That LOG.TXT error report is a known issue with Menu Overhaul.
It's the result of changes made to Touphscript.
Just ignore that error.
The next version of Bootleg fixes the problem with Mike's weapons and Trish(aka Mike)'s custom model pack.7z.
Cloud's weapons will now be integrated in the Bootleg installer.
Though you'll still need Trish(aka Mike)'s custom model pack.7z for other reasons.
 
Figured I'd update on my issue

The problem turned out to be in ulgp.exe. I had my set up files going to a directory location with spaces in the same, and ulgp did not handle that correctly. Posted on the page for that tool, and it's apparently going to be updated to fix directory resolving. Moving my set up directory to something smple (like w:\temp\) has resolved the issue and bootleg now fully installs.

Thanks for the help
 
Welcome slick,

it's a known bug. You must delete BFE.ini to solve this problem.   ;)
 
Status
Not open for further replies.
Back
Top