Yuffie successfully converted into FF7

  • Thread starter Thread starter squeeble
  • Start date Start date
Status
Not open for further replies.
Actually I'm pretty sure they used the gamecube emulator "DOLPHIN" to run gamecube iso's then using DX ripper they rip the models from there.
 
he he he...that's how they rip from the nintendo systems anyway...That's how some people were able to rip models from Metroid Prime, Metroid Prime 2 and Super Smash Bros Melee. They used some special program to play the games as if they were an emulator but they were actually using their gamecube plugged into the computer but you may not need that special program. From what I remember, that program was introduced later.
Click to expand...
Wow, that's a bunch of spew...

Here's a tip. There are people on the board who have been programming longer than you have been alive. When you make up garbage like this, we know.You don't look the hero, you look the fool.

Just letting you know.
 
Actually I'm pretty sure they used the gamecube emulator "DOLPHIN" to run gamecube iso's then using DX ripper they rip the models from there.
Click to expand...
I thought the emulator was the worst (with the saturn emu) emu in the world? Well if it runs a 1 FPS that's enough to rip the models . Savegames are on gamefaqs.
Didn't know this emu was directx9 though.

EDIT:
Wow, that's a bunch of spew...

Here's a tip. There are people on the board who have been programming longer than you have been alive. When you make up garbage like this, we know.You don't look the hero, you look the fool.

Just letting you know.
Click to expand...
Wow! That's frank. Well he saw "cool newbie" in his title, maybe he thought he was so cool he could say this (maybe he believe this?) , but anyways a newbie stays a newbie  :-D

Anyways, linking a TV tuner to the PC is bullsh*t . It's not an emu nor a 3D app... You can't rip 3Dmodels from a video.
 
Last edited:
I actually got this info off of another forum. Yes, ironically, it was a emulator website, but they said this would be an alternate way to rip models (yes, some of them were programmers).

Anyways, linking a TV tuner to the PC is bullsh*t . It's not an emu nor a 3D app... You can't rip 3Dmodels from a video.
Click to expand...
Eh, according to the members of that particular forum (can no longer find the topic on this however) A TV Tuner on it's own, you can't rip models. But with DScaler, you may be able to.

Wow, that's a bunch of spew...

Here's a tip. There are people on the board who have been programming longer than you have been alive. When you make up garbage like this, we know.You don't look the hero, you look the fool.

Just letting you know.
Click to expand...
Programming longer than 19 years?! Well, if they've been programming THAT long...couldn't they just, reverse engineer the Dirge of Cerberus PS2 CD-ROM and find out which file goes with which like you guys did for Final Fantasy VII? Or how about creating a program that allows you to view into these files, Or you can perhaps rip the bios of a PS2, Program a PS2 Emulator, which saves you the trouble of reverse engineering the game...I mean, if they've been programming THAT long at a professional level...

...then again, it's not the number of years, it the quality of work you put out.

By The Way, I wasn't joking. This wasn't intended as a joke or a form of BS as you may of thought. These people really did claim to have done this. I'm just passing this on to this site as a suggestion. You could take it or leave it, believe it or not.

Wow! That's frank. Well he saw "cool newbie" in his title, maybe he thought he was so cool he could say this (maybe he believe this?) , but anyways a newbie stays a newbie  :-D
Click to expand...
Actually, I never saw that...and I'm no newbie...so don't assume anything...
 
Oh, come on, DScaler is no more than a graphics filter (I think there is also a stand alone program to watch TV that's also called this way). It's used to improve the quality of the image. There is absolutely no way you can rip 3D information through a TV Tunner simply because it only provides 2D information.

PD: Sorry Jari :-P.
 
Last edited:
Anyways, linking a TV tuner to the PC is bullsh*t . It's not an emu nor a 3D app... You can't rip 3Dmodels from a video.
Click to expand...
Eh, according to the members of that particular forum (can no longer find the topic on this however) A TV Tuner on it's own, you can't rip models. But with DScaler, you may be able to.
Click to expand...
No, you won't. As nice app DScaler is, it's just a deinterlacer, pulldown remover and a general video post processor.

...not that any of that would matter. The picture you see is merely a rendering created by using some of the data in the models. There is no way to get that data from the said picture, as none of it is included in it.

A modeler might use the screenshots as a... well, model (in the sense that people model for artists) when recreating the model from scratch. But that has nothing to do with ripping.

I'm getting a feeling that someone pulled a Joey on you. :-D

Anyway, would you share the address of this forum with us? I'd like to read it. :)


EDIT: Bad Borde, posting before I could! :-D

EDIT2: Borde: Yeah, the stand alone came first and the directshow filter was developed from that (I think, at least it came later :P).
 
Last edited:
Anyways, linking a TV tuner to the PC is bullsh*t . It's not an emu nor a 3D app... You can't rip 3Dmodels from a video.
Click to expand...
Eh, according to the members of that particular forum (can no longer find the topic on this however) A TV Tuner on it's own, you can't rip models. But with DScaler, you may be able to.
Click to expand...
No, you won't. As nice app DScaler is, it's just a deinterlacer, pulldown remover and a general video post processor.

...not that any of that would matter. The picture you see is merely a rendering created by using some of the data in the models. There is no way to get that data from the said picture, as none of it is included in it.

A modeler might use the screenshots as a... well, model (in the sense that people model for artists) when recreating the model from scratch. But that has nothing to do with ripping.

I'm getting a feeling that someone pulled a Joey on you. :-D

Anyway, would you share the address of this forum with us? I'd like to read it. :)


EDIT: Bad Borde, posting before I could! :-D
Click to expand...
Ah I see now. Damn! I was going to buy a TV Tuner with my next paycheck for that very reason. *sigh*. Just my luck...!

...it was a pretty damn good Joey too...with screenshots and download links...

Well, the site is EMUTalk.net but the topic on DScale is no longer there (using the search feature anyway when I did so). The only reason I remembered DScale was looking at the files in my computer.

Sorry for the trouble...

There's got to be another way though.
 
Last edited:
Nevermind. Also, i didn't mean to be ... mean  :-) I know you're not a newbie, that was just a joke  :-P
 
Eh, I was actually in an irritable mood yesterday...Overworked.
 
Ok I have a bit of free time on me and I'm gonna get the lighting done on the models, I tried general lighting in kimera witch works ok but when it comes to aeris her skirt gets all F**ed up from the lighting. So I've decided to go in manually in max and bake the lighting into the models texture, so first I'm going to rig each model so I can animate it into the desired pose. My question for the knowledgable people of Qhimm's forums to tell me where to light the characters from, I thought I'd put this out now as it will take me a little while to rig the characters. Noting that I can put multiple light sources on any direction, thankyou :-D.
 
Here I put you to auron for if you want it:



Also I have to gilgamesh and to griever Warn me if you want it.
 
Last edited:
los modelos trabajan? Si es así entonces si. :-) pero si necesitan corregido, despues nosotros puede fijarlos para arriba (not sure if I wrote it right... it was years since I properly used spanish)
In english: do the models work? if so, then yes. :-) but if they need to edited, then we can fix them up.
so, we are happy to accept your kind offering of auron, gilgamesh and griever.
 
No, I don't think, that the models really have a job and go to work.  :-D
At least that is the sense of 'trabajar' in Spanish.  :wink:.
 
Woh hey wait up I already have all these models so I don't need them, I don't know if you Murak can use them for your mod but I'm sticking as close to the originals as possible with this, so no auron or gilgamesh sorry, and Murak if you mean "we" I hope you mean you :-P coz I'm flooded at the moment :lol:. @Wintermute I didn't understand what you meant in your post.
 
Work, in the meaning of "not-out of order" is Funcionnar ... As in French, Fonctionner ... It's not Latin derivated for  nothing  :-D
Trabajar is indeed for Work, but as I work in MacDonald's , not as if something works, or is broken .... LOL  :-D

EDIT
if you mean "we" I hope you mean you :-P coz I'm flooded at the moment :lol:. @Wintermute I didn't understand what you meant in your post.
Click to expand...
Since you're talking of that, how are you doing in your mod? No news, good news as we say in France hé hé lol

As for wintermute, he meant that the models don't have a job, and therefore don't work, since Trabajar in Spanish only mean Work at an office, or as a job...

No, I don't think, that the models really have a job and go to work.  :-D
At least that is the sense of 'trabajar' in Spanish.  :wink:.
Click to expand...
 
Last edited:
Oh ok i get it now :lol:. As for progress you'll just have to keep watch the next few weeks won't you  :-D
 
As Djé said. Maybe I should have explained it better for Non-Spanish speakers.
I just couldn't resist making a stupid comment. ;-) Judging from murak's literal translation it is quite obvious that his mother language is English.
 
I think I did pretty well considering I didn't use spanish since I was 12.
 
Status
Not open for further replies.
Back
Top